The Grooved Surface BL-215G Polyethylene Foam Breathable Gasket is a single-piece bottle cap liner. It is composed of a 1.5mm-thick polyethylene foam liner full of breathable holes and a PTFE breathable membrane with excellent corrosion resistance and hydrophobicity.
Product Introduction
The Grooved Surface BL-215G Polyethylene Foam Breathable Gasket is a single-piece bottle cap liner. It is composed of a 1.5mm-thick polyethylene foam liner full of breathable holes and a PTFE breathable membrane with excellent corrosion resistance and hydrophobicity. It provides reliable sealing for products in bottles such as pesticides, fertilizers, and disinfectants that are prone to generating gas and causing bottle expansion. While blocking the penetration of the products, it allows the gas generated by the products in the container to be released, to prevent the gas from damaging the container's sealing performance and causing leakage accidents. The foam surface of the Grooved Surface BL-215G Polyethylene Foam Breathable Gasket is covered with grooves, which increases the air permeability to meet higher air permeability requirements.
Material Structure
Structure: Single-piece type
Sealing method: Inner gasket of the bottle cap
Product standard for polyethylene foamed breathable gasket:
|
Total thickness |
1.5mm (± 0.1mm) |
|
Weight |
0.68kg/㎡ |
|
Width of roll |
260mm |
Selling Form
| Roll form (26cm width) | Core: 7cm width paper core |  |
| Outside package: PE plastic bag + carton | ||
| Pieces form (as custom required) | Inside package: PE film sleeve |  |
| Outside package: PE plastic bag + carton |
Customization Scope
Foaming thickness
TDS: BL-215G
Use scenarios (cases): Plastic bottles, floor disinfectant, pesticides, fertilizers
Product advantages (compared to other similar products): Highly hydrophobic and corrosion-resistant organic polymer breathable membrane, strong bonding force between the breathable film and polyethylene foam.
Quality Management System: ISO 9001
Ordering, production and shipment process:
After-sales issue handling procedure
1. File a case 2. Collect evidence 3. Conduct internal investigation 4. Provide feedback 5. Collect requirements 6. Propose solutions 7. Confirm the solution 8. Implement the solution
FAQ：
1. Question: Standard product minimum order quantity?
Answer: It is determined based on the diameter size of the gasket required by the customer. The required materials need to reach 100 square meters in area.
2. Question: Customized foaming thickness minimum order quantity?
Answer: It is determined based on the diameter size of the gasket required by the customer. The required materials need to reach 3,000 square meters in area.
3. Question: Payment method?
Answer: Half of the payment will be made as a deposit before placing the order, and the full payment will be made before shipment.
4. Question: Cooperative cases?
Answer: South Korea, Costa Rica, Thailand
Looking for the Right Sealing Liner for Your Packaging?
Tell us your bottle material, contents, and sealing requirements — our engineers will recommend the best solution.
Navigation
Navigation
Contact Us
Tel.: +86 754 8998 1769
E-mail: lumy@wanqipk.com
Add.: One of the No.8 Fangxun Road, Jiudi, Outing Street, Longhu District, Shantou
Get in Touch
Get in Touch
